How To Use A Block And Tackle With A Winch (User Guide)

If your vehicle becomes stuck, a winch can assist you. From mud, snow, and rocky outcroppings. A winch can undeniably assist you in difficult conditions, but it can also fall short on occasion. 

The problem could be that your winch lacks the pulling power required to get you out. 

That is why winches, particularly those used for self-recovery when stuck, come equipped with tool packs. 

The tools in those packs can assist the winch when it finds itself in difficult situations. A block and tackle are some of the tools in the pack.

A block and tackle are not only useful for self-recovery when stuck, but they can also be extremely useful in terms of utility. 

They can be used with your winch cables by wrapping them around them. It is threaded through the pulleys to create a mechanical advantage that increases the force applied to the cable.

So, this guide will show you the process of ‘How to use a Block and Tackle with a Winch.’

But first, let’s understand the meaning of Block and Tackle.

What are Block and Tackle?

block and tackle

A block and tackle, also known as an only tackle, is a system that consists of two or more pulleys with a cable threaded between them and is typically used to lift heavy loads.

A block is a group of pulleys or sheaves attached to a single frame. A tackle is a block arrangement with a rope threaded through the pulleys. 

It is represented by using a single consistent rope to transfer tension around at least one pulley to hoist a load. 

The number of rope parts that hoists the load determines its advantageous mechanical position. The advantageous mechanical position determines how much easier it is to take or hoist a load.

How To Use A Block And Tackle With a Winch 

snatch blocks

A block and tackle are extremely useful because, as previously stated, they can increase the weight capacity of your winch. It can be used to guide the winch with any tasks that the winch cannot complete. 

The pulley is built to withstand heavy loads and can also redirect cables for self-recovery when they become stuck. A block and tackle can be useful if your winch lacks the necessary pulling power.

To use them, you’d feed the cable through the snatch block and then back to your vehicle. It is attached to an anchor point and placed directly in front of the vehicle.

  • You need a stable anchoring point to withstand the weight of winching your car out.
  • Now, wrap A Tree Trunk Protector Around The Anchoring Point. 
  • Attach a D-shackle to each end of the straps.
  • Pull the winch cable away from the winch, but not so far that it creates unnecessary slack. This is accomplished by turning the lever and selecting the “free spool” or “disengage” option.
  • Thread your winch cable through the block and tackle, and wrap it around the block.
  • Next, simply connect your winch pulley block to the D-shackle attached to the tree trunk protector.
  • Locate your vehicle’s recovery hooks or points and attach the winch cable hook there. If there aren’t any, simply find a stable place in your car’s frame to hook your winch cable.
  • Turn the lever to the Engage position and gently press the gas pedal. 
  • Stop winching once you’ve reached a stable position and can drive.

Also check: How To Winch Backwards & How To Use A Winch Strap

Conclusion

In this guide of ‘How to use a Block and Tackle with a Winch’, we have learned about the meaning of Block and Tackle and not only that but also about how we can use block and tackle with a winch using some simple and easy steps.

Hope you find this article helpful.

Note: As an Amazon Associate, I earn commission from qualifying purchases at no cost to you.

Photo of author

CEO & Head Author

Author

Edward

Edward is an Off-Road enthusiast who wants to help other enthusiasts use the power of information to find, compare and buy the winch product that is right for them.

Leave a Comment